General discussions about V-USB, our firmware-only implementation of a low speed USB device on Atmel's AVR microcontrollers
-
NoOne
- Posts: 3
- Joined: Fri Sep 19, 2008 12:54 pm
- Location: Graz, Austria
Post
by NoOne » Fri Sep 19, 2008 7:00 pm
I'd like to build a timer based camera trigger.
Therefor I only need one IO-Pin and I dont want to use an ATMega8.
Is it possible to combine an ATTiny45 or ATTiny26 with the USBaspLoader?
-
NoOne
- Posts: 3
- Joined: Fri Sep 19, 2008 12:54 pm
- Location: Graz, Austria
Post
by NoOne » Sat Sep 20, 2008 7:04 pm
OK ... I realized that there is to little memory
-
christian
- Objective Development
- Posts: 1443
- Joined: Thu Nov 09, 2006 11:46 am
Post
by christian » Wed Sep 24, 2008 3:56 pm
Not just too little memory, the ATTiny x5 has no boot loader section.
-
NoOne
- Posts: 3
- Joined: Fri Sep 19, 2008 12:54 pm
- Location: Graz, Austria
Post
by NoOne » Wed Sep 24, 2008 4:01 pm
yes .. I noticed this issue later ...
Are there any ATTiny* with a bootloader section?
-
christian
- Objective Development
- Posts: 1443
- Joined: Thu Nov 09, 2006 11:46 am
Post
by christian » Wed Sep 24, 2008 4:03 pm
Don't know. Probably not...