ATMEGA32A and VUSB
ATMEGA32A and VUSB
I am having trouble with VUSB and an ATMEGA32A which is supposedly a drop in replacement for the ATMEGA32. I suspect it is the hardware interface. Has anyone used VUSB successfully with the ATMEGA32, if so what was the hardware interface circuit?
Re: ATMEGA32A and VUSB
I used the ATMega32A just fine for V-USB (with 5V hardware, no zeners). Just make sure you use the right crystal, and set the fuses right (some "A" parts have different fuse settings then the not "A" variants)
Re: ATMEGA32A and VUSB
Thanks for your response, great to hear it works. Can you point me to the hardware circuit you used please.
Re: ATMEGA32A and VUSB
I don't have the schematic at hand. But I only used a few components:
100nF to stabelize VCC
2.2k Ohm pull up from VCC to D-
470 Ohm from D- to INT1
470 Ohm from D+ to INT0
20Mhz XTal with 2x 20pF to ground
100nF to stabelize VCC
2.2k Ohm pull up from VCC to D-
470 Ohm from D- to INT1
470 Ohm from D+ to INT0
20Mhz XTal with 2x 20pF to ground
Re: ATMEGA32A and VUSB
I have successfully V-USB to MEGA32A on, and successfully tested a number of V-USB Project
But I do not know how to upload files
But I do not know how to upload files