Ethernet over Usb?

General discussions about V-USB, our firmware-only implementation of a low speed USB device on Atmel's AVR microcontrollers
Post Reply
hybridmetta
Posts: 2
Joined: Fri Nov 09, 2012 10:34 pm

Ethernet over Usb?

Post by hybridmetta » Fri Nov 09, 2012 10:51 pm

Hello everyone.

I've been thinking about the possibility of using v-usb as a tiny webserver capable of receiving and sending data to an avr. Anyone ever tried creating the descriptors for ethernet over usb? Is it even possible? I glanced over this document but can't quite wrap my brain around it http://www.usb.org/developers/devclass_docs/CDC_EEM10.pdf

I suppose a working TCP/IP stack (maybe http://code.google.com/p/uhttpd-avr/ or http://code.google.com/p/avr-uip/?) and some kind of flash storage for the webserver files would be needed.

Has anyone tried to do something like this?

Thanks

ulao
Rank 4
Rank 4
Posts: 481
Joined: Mon Aug 25, 2008 8:45 pm

Re: Ethernet over Usb?

Post by ulao » Sat Nov 10, 2012 6:16 am

I wonder if HID over I2C may do it?

Also I know VMware has a VMBus HID mini port virtual nic. Not sure about making a descriptor to communicate with it though. Did you look at the HID Descriptor Tool? Maybe there is a HID network virtual driver.

hybridmetta
Posts: 2
Joined: Fri Nov 09, 2012 10:34 pm

Re: Ethernet over Usb?

Post by hybridmetta » Tue Nov 20, 2012 2:32 am

Thank you for your response ulao.

I looked into HID only to find there is no network related descriptors. The only alternative for my application is CDC.

So i decided to take a shot at this myself and after some digging, i found out that the common solution in situations like this is for an ethernet over usb device to have 2 descriptors: CDC ECM and RNDIS. The first works under linux/mac while the second is Microsoft proprietary solution.

Unfortunately i wasn't so lucky...
I needed the device to run under most platforms but right after i wrote the descriptor for ECM, i found out about the bulk-endpoint to interrupt conversion enforcement for usb1.1 devices that my 3.6.6-1 kernel is so fond about...

What is funny is that OSX doesn't have any problems with the device and will gladly show a new ethernet connection.
I guess it's time to opt for an avr-usb and LUFA.

In any case, if someone want's to give CDC-ECM for OSX a shot, this is what i used. I took a bit of inspiration from http://www.recursion.jp/avrcdc/cdc-232.html

Code: Select all

const static PROGMEM char deviceDescr[] = {
   /* Device Descriptor - usbcdc11.pdf table 20 */
   18,               // 1 byte - Blength - size of this descriptor in bytes
   USBDESCR_DEVICE,// 1 byte - BdescriptorType - DEVICE descriptor type
   0x10, 0x01,         // 2 byte - BcdUSB - BCD-encoded USB revision number
   0x02,            // 1 byte - BdeviceClass - Class code: Please refer to USB specification for interpretation.
   0x00,            // 1 byte - BdeviceSubClass - SubClass code: Please refer to USB specification for interpretation.
   0,               // 1 byte - BdeviceProtocol - Protocol code: : Please refer to USB specification for interpretation.
   8,               // 1 byte - bMaxPacketSize0 - Maximum packet size for Endpoint 0
   USB_CFG_VENDOR_ID,   // 2 byte - IdVendor
   USB_CFG_DEVICE_ID,   // 2 byte - IdProduct
   0x01, 0x01,//USB_CFG_DEVICE_VERSION, // 2 byte - BcdDevice - Device release number
   1,               // 1 byte - Imanufacturer - Index of manufacturer string descriptor
   2,               // 1 byte - Iproduct - Index of product string descriptor
   8,               // 1 byte - IserialNumber
   1,//2,               // 1 byte - BnumConfigurations - Number of configurations
};

static const PROGMEM char configDescrCDCECM[] = {   /* USB configuration descriptor */
    9,          /* sizeof(usbDescrConfig): length of descriptor in bytes */
    USBDESCR_CONFIG,    /* descriptor type */
    80, 0,      /* total length of data returned (including inlined descriptors) */
    2,          /* number of interfaces in this configuration */
    1,          /* index of this configuration */
    4,          /* configuration name string index */
#if USB_CFG_IS_SELF_POWERED
    (1 << 7) | USBATTR_SELFPOWER,       /* attributes */
#else
    (1 << 7),                           /* attributes */
#endif
    USB_CFG_MAX_BUS_POWER/2,            /* max USB current in 2mA units */

    /* interface descriptor follows inline: */
    9,          /* sizeof(usbDescrInterface): length of descriptor in bytes */
    USBDESCR_INTERFACE, /* descriptor type */
    0,          /* index of this interface */
    0,          /* alternate setting for this interface */
    USB_CFG_HAVE_INTRIN_ENDPOINT,   /* endpoints excl 0: number of endpoint descriptors to follow */
    USB_CFG_INTERFACE_CLASS,
    USB_CFG_INTERFACE_SUBCLASS,
    USB_CFG_INTERFACE_PROTOCOL,
    5,          /* string index for interface */

    /* CDC Class-Specific descriptor */
    5,           /* sizeof(usbDescrCDC_HeaderFn): length of descriptor in bytes */
    0x24,        /* descriptor type */
    0,           /* header functional descriptor */
    0x10, 0x01,

   5,           /* sizeof(usbDescrCDC_UnionFn): length of descriptor in bytes */
    0x24,        /* descriptor type */
    6,           /* union functional descriptor */
    0,           /* CDC_COMM_INTF_ID */
    1,           /* CDC_DATA_INTF_ID */

    /* Ethernet Networking Functional Descriptor */
   13,             // 1 byte - bFunctionLength - Size of this functional descriptor, in bytes.
   0x24,            // 1 byte - bDescriptorType - CS_INTERFACE
   0x0F,            // 1 byte - bDescriptorSubtype - Ethernet Networking functional descriptor subtype as defined in [USBCDC1.2]
   3,               // 1 byte - iMACAddress - index of 48bit Ethernet MAC address string descriptor
   0x00,            // 4 byte - bmEthernetStatistics - Indicates which Ethernet statistics functions the device collects.
   0x00, 0x00, 0x00,
   0xEA, 0x05,         // 2 byte - wMaxSegmentSize - The maximum segment size that the Ethernet device is capable of supporting. (typically 1514 bytes)
   0x00, 0x00,         // 2 byte - wNumberMCFilters - Contains the number of multicast filters that can be configured by the host.
   0x00,            // 1 byte - bNumberPowerFilters - Contains the number of pattern filters that are available for causing wake-up of the host.

    /* Endpoint Descriptor */
    7,           /* sizeof(usbDescrEndpoint) */
    USBDESCR_ENDPOINT,  /* descriptor type = endpoint */
    0x80|USB_CFG_EP3_NUMBER,        /* IN endpoint number */
    0x03,        /* attrib: Interrupt endpoint */
    8, 0,        /* maximum packet size */
    USB_CFG_INTR_POLL_INTERVAL,        /* in ms */

   
   /* Interface Descriptor  */
    9,           /* sizeof(usbDescrInterface): length of descriptor in bytes */
    USBDESCR_INTERFACE,           /* descriptor type */
    1,           /* index of this interface */
    0,           /* alternate setting for this interface */
    0,           /* endpoints excl 0: number of endpoint descriptors to follow */
    0x0A,        /* Data Interface Class Codes */
    0,
    0,           /* Data Interface Class Protocol Codes */
    0,           /* string index for interface */
   
    /* Interface Descriptor  */
    9,           /* sizeof(usbDescrInterface): length of descriptor in bytes */
    USBDESCR_INTERFACE,           /* descriptor type */
    1,           /* index of this interface */
    1,           /* alternate setting for this interface */
    2,           /* endpoints excl 0: number of endpoint descriptors to follow */
    0x0A,        /* Data Interface Class Codes */
    0,
    0,           /* Data Interface Class Protocol Codes */
    6,           /* string index for interface */

    /* Endpoint Descriptor */
    7,           /* sizeof(usbDescrEndpoint) */
    USBDESCR_ENDPOINT,  /* descriptor type = endpoint */
    0x01,        /* OUT endpoint number 1 */
    0x02,        /* attrib: Bulk endpoint */
    8, 0,        /* maximum packet size */
    0,           /* in ms */

    /* Endpoint Descriptor */
    7,           /* sizeof(usbDescrEndpoint) */
    USBDESCR_ENDPOINT,  /* descriptor type = endpoint */
    0x81,        /* IN endpoint number 1 */
    0x02,        /* attrib: Bulk endpoint */
    8, 0,        /* maximum packet size */
    0,           /* in ms */
};

const static PROGMEM int iMacAddress[] = {// 12 byte - 48bit Ethernet MAC address string descriptor
    USB_STRING_DESCRIPTOR_HEADER(12),
   '0','1','2','3','4','5','6','7','8','9','A','B',
};

const static PROGMEM int iProduct[] = {
    USB_STRING_DESCRIPTOR_HEADER(12),
   'U','S','B','-','E','t','h','e','r','n','e','t',
};

const static PROGMEM int iManufacturer[] = {
    USB_STRING_DESCRIPTOR_HEADER(11),
   'H','y','b','r','i','d','m','e','t','t','a',
};

const static PROGMEM int iSerial[] = {
    USB_STRING_DESCRIPTOR_HEADER(8),
   '0','0','0','0','0','0','0','1',
};

const static PROGMEM int iConfiguration[] = {
    USB_STRING_DESCRIPTOR_HEADER(26),
   'U','S','B',' ','E','t','h','e','r','n','e','t',' ','C','o','n','f','i','g','u','r','a','t','i','o','n',
};

const static PROGMEM int iInterface[] = {
    USB_STRING_DESCRIPTOR_HEADER(13),
   'C','o','m','m','u','n','i','c','a','t','i','o','n',
};

const static PROGMEM int iInterface2[] = {
    USB_STRING_DESCRIPTOR_HEADER(20),
   'D','a','t','a',' ','I','n','t','e','r','f','a','c','e',' ','C','l','a','s','s',
};

const PROGMEM char usbDescriptorString0[] = { /* language descriptor */
    4,          /* sizeof(usbDescriptorString0): length of descriptor in bytes */
    3,          /* descriptor type */
    0x09, 0x04, /* language index (0x0409 = US-English) */
};


Code: Select all

uchar usbFunctionDescriptor(usbRequest_t *rq)
{
   usbMsgLen_t len = 0;
   switch (rq->bRequest) {
      case USBRQ_GET_DESCRIPTOR:
         switch (rq->wValue.bytes[1]) {
            case USBDESCR_DEVICE:
               usbMsgPtr = (char *)deviceDescr;
               len = sizeof(deviceDescr);
               break;
            case USBDESCR_CONFIG:
               usbMsgPtr = (uchar *)configDescrCDCRNDIS;
               len = sizeof(configDescrCDCRNDIS);
               break;
            case USBDESCR_STRING:
               switch (rq->wValue.bytes[0]) {
                  case 1: //iManufacturer
                     usbMsgPtr = (uchar *)iManufacturer;
                     len = sizeof(iManufacturer);
                     break;
                  case 2: //iProduct
                     usbMsgPtr = (uchar *)iProduct;
                     len = sizeof(iProduct);
                     break;
                  case 3: //iMacAddress
                     usbMsgPtr = (uchar *)iMacAddress;
                     len = sizeof(iMacAddress);
                     break;
                  case 4: //iConfiguration
                     usbMsgPtr = (uchar *)iConfiguration;
                     len = sizeof(iConfiguration);
                     break;
                  case 5: //iInterface
                     usbMsgPtr = (uchar *)iInterface;
                     len = sizeof(iInterface);
                     break;
                  case 6: //iInterface2
                     usbMsgPtr = (uchar *)iInterface2;
                     len = sizeof(iInterface2);
                     break;
                  case 8: //iSerial
                     usbMsgPtr = (uchar *)iSerial;
                     len = sizeof(iSerial);
                     break;
                  case 0:
                     usbMsgPtr = (uchar *)(usbDescriptorString0);
                     len = sizeof(usbDescriptorString0);
                     break;
                  default:
                     break;
               }
               break;
            default:
               break;
         }
         break;
      default:
         break;
   }
   return len;
}


usbconfig.h

Code: Select all

/* Name: usbconfig.h
 * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
 * Author: Christian Starkjohann
 * Creation Date: 2005-04-01
 * Tabsize: 4
 * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
 * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
 * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
 */

#ifndef __usbconfig_h_included__
#define __usbconfig_h_included__

/*
General Description:
This file is an example configuration (with inline documentation) for the USB
driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
wire the lines to any other port, as long as D+ is also wired to INT0 (or any
other hardware interrupt, as long as it is the highest level interrupt, see
section at the end of this file).
+ To create your own usbconfig.h file, copy this file to your project's
+ firmware source directory) and rename it to "usbconfig.h".
+ Then edit it accordingly.
*/

/* ---------------------------- Hardware Config ---------------------------- */

#define USB_CFG_IOPORTNAME      D
/* This is the port where the USB bus is connected. When you configure it to
 * "B", the registers PORTB, PINB and DDRB will be used.
 */
#define USB_CFG_DMINUS_BIT      3
/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
 * This may be any bit in the port.
 */
#define USB_CFG_DPLUS_BIT       2
/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
 * This may be any bit in the port. Please note that D+ must also be connected
 * to interrupt pin INT0! [You can also use other interrupts, see section
 * "Optional MCU Description" below, or you can connect D- to the interrupt, as
 * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
 * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
 * markers every millisecond.]
 */
#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
 * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
 * require no crystal, they tolerate +/- 1% deviation from the nominal
 * frequency. All other rates require a precision of 2000 ppm and thus a
 * crystal!
 * Since F_CPU should be defined to your actual clock rate anyway, you should
 * not need to modify this setting.
 */
#if USB_CFG_CLOCK_KHZ==18000
#define USB_CFG_CHECK_CRC       1
#else
#define USB_CFG_CHECK_CRC       0
#endif

/* Define this to 1 if you want that the driver checks integrity of incoming
 * data packets (CRC checks). CRC checks cost quite a bit of code size and are
 * currently only available for 18 MHz crystal clock. You must choose
 * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
 */

/* ----------------------- Optional Hardware Config ------------------------ */

/* #define USB_CFG_PULLUP_IOPORTNAME   D */
/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
 * V+, you can connect and disconnect the device from firmware by calling
 * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
 * This constant defines the port on which the pullup resistor is connected.
 */
/* #define USB_CFG_PULLUP_BIT          4 */
/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
 * above) where the 1.5k pullup resistor is connected. See description
 * above for details.
 */

/* --------------------------- Functional Range ---------------------------- */

#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
/* Define this to 1 if you want to compile a version with two endpoints: The
 * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
 * number).
 */
#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
/* Define this to 1 if you want to compile a version with three endpoints: The
 * default control endpoint 0, an interrupt-in endpoint 3 (or the number
 * configured below) and a catch-all default interrupt-in endpoint as above.
 * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
 */
#define USB_CFG_EP3_NUMBER              3
/* If the so-called endpoint 3 is used, it can now be configured to any other
 * endpoint number (except 0) with this macro. Default if undefined is 3.
 */
/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
/* The above macro defines the startup condition for data toggling on the
 * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
 * Since the token is toggled BEFORE sending any data, the first packet is
 * sent with the oposite value of this configuration!
 */
#define USB_CFG_IMPLEMENT_HALT          0
/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
 * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
 * it is required by the standard. We have made it a config option because it
 * bloats the code considerably.
 */
#define USB_CFG_SUPPRESS_INTR_CODE      0
/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
 * want to send any data over them. If this macro is defined to 1, functions
 * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
 * you need the interrupt-in endpoints in order to comply to an interface
 * (e.g. HID), but never want to send any data. This option saves a couple
 * of bytes in flash memory and the transmit buffers in RAM.
 */
#define USB_CFG_INTR_POLL_INTERVAL      255
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
 * interval. The value is in milliseconds and must not be less than 10 ms for
 * low speed devices.
 */
#define USB_CFG_IS_SELF_POWERED         0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the
 * device is powered from the USB bus.
 */
#define USB_CFG_MAX_BUS_POWER           100
/* Set this variable to the maximum USB bus power consumption of your device.
 * The value is in milliamperes. [It will be divided by two since USB
 * communicates power requirements in units of 2 mA.]
 */
#define USB_CFG_IMPLEMENT_FN_WRITE      1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
 * transfers. Set it to 0 if you don't need it and want to save a couple of
 * bytes.
 */
#define USB_CFG_IMPLEMENT_FN_READ       1
/* Set this to 1 if you need to send control replies which are generated
 * "on the fly" when usbFunctionRead() is called. If you only want to send
 * data from a static buffer, set it to 0 and return the data from
 * usbFunctionSetup(). This saves a couple of bytes.
 */
#define USB_CFG_IMPLEMENT_FN_WRITEOUT   1
/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
 * You must implement the function usbFunctionWriteOut() which receives all
 * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
 * can be found in 'usbRxToken'.
 */
#define USB_CFG_HAVE_FLOWCONTROL        1
/* Define this to 1 if you want flowcontrol over USB data. See the definition
 * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
 * usbdrv.h.
 */
#define USB_CFG_DRIVER_FLASH_PAGE       0
/* If the device has more than 64 kBytes of flash, define this to the 64 k page
 * where the driver's constants (descriptors) are located. Or in other words:
 * Define this to 1 for boot loaders on the ATMega128.
 */
#define USB_CFG_LONG_TRANSFERS          0
/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
 * in a single control-in or control-out transfer. Note that the capability
 * for long transfers increases the driver size.
 */
/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
/* This macro is a hook if you want to do unconventional things. If it is
 * defined, it's inserted at the beginning of received message processing.
 * If you eat the received message and don't want default processing to
 * proceed, do a return after doing your things. One possible application
 * (besides debugging) is to flash a status LED on each packet.
 */
/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
/* This macro is a hook if you need to know when an USB RESET occurs. It has
 * one parameter which distinguishes between the start of RESET state and its
 * end.
 */
/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
/* This macro (if defined) is executed when a USB SET_ADDRESS request was
 * received.
 */
#define USB_COUNT_SOF                   0
/* define this macro to 1 if you need the global variable "usbSofCount" which
 * counts SOF packets. This feature requires that the hardware interrupt is
 * connected to D- instead of D+.
 */
/* #ifdef __ASSEMBLER__
 * macro myAssemblerMacro
 *     in      YL, TCNT0
 *     sts     timer0Snapshot, YL
 *     endm
 * #endif
 * #define USB_SOF_HOOK                    myAssemblerMacro
 * This macro (if defined) is executed in the assembler module when a
 * Start Of Frame condition is detected. It is recommended to define it to
 * the name of an assembler macro which is defined here as well so that more
 * than one assembler instruction can be used. The macro may use the register
 * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
 * immediately after an SOF pulse may be lost and must be retried by the host.
 * What can you do with this hook? Since the SOF signal occurs exactly every
 * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
 * designs running on the internal RC oscillator.
 * Please note that Start Of Frame detection works only if D- is wired to the
 * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
 */
#define USB_CFG_CHECK_DATA_TOGGLING     0
/* define this macro to 1 if you want to filter out duplicate data packets
 * sent by the host. Duplicates occur only as a consequence of communication
 * errors, when the host does not receive an ACK. Please note that you need to
 * implement the filtering yourself in usbFunctionWriteOut() and
 * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
 * for each control- and out-endpoint to check for duplicate packets.
 */
#if USB_CFG_CLOCK_KHZ==16500 || USB_CFG_CLOCK_KHZ==12800
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   1
#include "osccal.h"
#else
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
#endif
/* define this macro to 1 if you want the function usbMeasureFrameLength()
 * compiled in. This function can be used to calibrate the AVR's RC oscillator.
 */
#define USB_USE_FAST_CRC                0
/* The assembler module has two implementations for the CRC algorithm. One is
 * faster, the other is smaller. This CRC routine is only used for transmitted
 * messages where timing is not critical. The faster routine needs 31 cycles
 * per byte while the smaller one needs 61 to 69 cycles. The faster routine
 * may be worth the 32 bytes bigger code size if you transmit lots of data and
 * run the AVR close to its limit.
 */

/* -------------------------- Device Description --------------------------- */

#define  USB_CFG_VENDOR_ID       0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */
/* USB vendor ID for the device, low byte first. If you have registered your
 * own Vendor ID, define it here. Otherwise you may use one of obdev's free
 * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
 * *** IMPORTANT NOTE ***
 * This template uses obdev's shared VID/PID pair for Vendor Class devices
 * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
 * the implications!
 */
#define  USB_CFG_DEVICE_ID       0xe1, 0x05 /* = 0x05e1 = 1505 */
/* This is the ID of the product, low byte first. It is interpreted in the
 * scope of the vendor ID. If you have registered your own VID with usb.org
 * or if you have licensed a PID from somebody else, define it here. Otherwise
 * you may use one of obdev's free shared VID/PID pairs. See the file
 * USB-IDs-for-free.txt for details!
 * *** IMPORTANT NOTE ***
 * This template uses obdev's shared VID/PID pair for Vendor Class devices
 * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
 * the implications!
 */
#define USB_CFG_DEVICE_VERSION  0x00, 0x01
/* Version number of the device: Minor number first, then major number.
 */
#define USB_CFG_VENDOR_NAME     'H' ,'y' ,'b' ,'r' ,'i' ,'d' ,'m' ,'e' ,'t' ,'t' ,'a'
#define USB_CFG_VENDOR_NAME_LEN 11
/* These two values define the vendor name returned by the USB device. The name
 * must be given as a list of characters under single quotes. The characters
 * are interpreted as Unicode (UTF-16) entities.
 * If you don't want a vendor name string, undefine these macros.
 * ALWAYS define a vendor name containing your Internet domain name if you use
 * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
 * details.
 */
#define USB_CFG_DEVICE_NAME     'U', 'S', 'B', '-', 'E', 't', 'h', 'e' ,'r' ,'n' ,'e' ,'t'
#define USB_CFG_DEVICE_NAME_LEN 12
/* Same as above for the device name. If you don't want a device name, undefine
 * the macros. See the file USB-IDs-for-free.txt before you assign a name if
 * you use a shared VID/PID.
 */
/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
/* Same as above for the serial number. If you don't want a serial number,
 * undefine the macros.
 * It may be useful to provide the serial number through other means than at
 * compile time. See the section about descriptor properties below for how
 * to fine tune control over USB descriptors such as the string descriptor
 * for the serial number.
 */
#define USB_CFG_DEVICE_CLASS        2    /* set to 0 if deferred to interface */
#define USB_CFG_DEVICE_SUBCLASS     0
/* See USB specification if you want to conform to an existing device class.
 * Class 0xff is "vendor specific".
 */
#define USB_CFG_INTERFACE_CLASS     2       /* Communications Interface Class */
#define USB_CFG_INTERFACE_SUBCLASS  6       /* Ethernet Networking Control Model */
#define USB_CFG_INTERFACE_PROTOCOL  0       /* No class specific protocol required */
/* See USB specification if you want to conform to an existing device class or
 * protocol. The following classes must be set at interface level:
 * HID class is 3, no subclass and protocol required (but may be useful!)
 * CDC class is 2, use subclass 2 and protocol 1 for ACM
 */
/* #define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    42 */
/* Define this to the length of the HID report descriptor, if you implement
 * an HID device. Otherwise don't define it or define it to 0.
 * If you use this define, you must add a PROGMEM character array named
 * "usbHidReportDescriptor" to your code which contains the report descriptor.
 * Don't forget to keep the array and this define in sync!
 */

/* #define USB_PUBLIC static */
/* Use the define above if you #include usbdrv.c instead of linking against it.
 * This technique saves a couple of bytes in flash memory.
 */

/* ------------------- Fine Control over USB Descriptors ------------------- */
/* If you don't want to use the driver's default USB descriptors, you can
 * provide our own. These can be provided as (1) fixed length static data in
 * flash memory, (2) fixed length static data in RAM or (3) dynamically at
 * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
 * information about this function.
 * Descriptor handling is configured through the descriptor's properties. If
 * no properties are defined or if they are 0, the default descriptor is used.
 * Possible properties are:
 *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
 *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
 *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
 *     you want RAM pointers.
 *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
 *     in static memory is in RAM, not in flash memory.
 *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
 *     the driver must know the descriptor's length. The descriptor itself is
 *     found at the address of a well known identifier (see below).
 * List of static descriptor names (must be declared PROGMEM if in flash):
 *   char usbDescriptorDevice[];
 *   char usbDescriptorConfiguration[];
 *   char usbDescriptorHidReport[];
 *   char usbDescriptorString0[];
 *   int usbDescriptorStringVendor[];
 *   int usbDescriptorStringDevice[];
 *   int usbDescriptorStringSerialNumber[];
 * Other descriptors can't be provided statically, they must be provided
 * dynamically at runtime.
 *
 * Descriptor properties are or-ed or added together, e.g.:
 * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
 *
 * The following descriptors are defined:
 *   USB_CFG_DESCR_PROPS_DEVICE
 *   USB_CFG_DESCR_PROPS_CONFIGURATION
 *   USB_CFG_DESCR_PROPS_STRINGS
 *   USB_CFG_DESCR_PROPS_STRING_0
 *   USB_CFG_DESCR_PROPS_STRING_VENDOR
 *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
 *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
 *   USB_CFG_DESCR_PROPS_HID
 *   USB_CFG_DESCR_PROPS_HID_REPORT
 *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
 *
 * Note about string descriptors: String descriptors are not just strings, they
 * are Unicode strings prefixed with a 2 byte header. Example:
 * int  serialNumberDescriptor[] = {
 *     USB_STRING_DESCRIPTOR_HEADER(6),
 *     'S', 'e', 'r', 'i', 'a', 'l'
 * };
 */

#define USB_CFG_DESCR_PROPS_DEVICE                  USB_PROP_IS_DYNAMIC//0
#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_STRINGS                 USB_PROP_IS_DYNAMIC//0
#define USB_CFG_DESCR_PROPS_STRING_0                USB_PROP_IS_DYNAMIC//0
#define USB_CFG_DESCR_PROPS_STRING_VENDOR           USB_PROP_IS_DYNAMIC//0
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          USB_PROP_IS_DYNAMIC//0
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    USB_PROP_IS_DYNAMIC//0
#define USB_CFG_DESCR_PROPS_HID                     0
#define USB_CFG_DESCR_PROPS_HID_REPORT              0
#define USB_CFG_DESCR_PROPS_UNKNOWN                 0

/* ----------------------- Optional MCU Description ------------------------ */

/* The following configurations have working defaults in usbdrv.h. You
 * usually don't need to set them explicitly. Only if you want to run
 * the driver on a device which is not yet supported or with a compiler
 * which is not fully supported (such as IAR C) or if you use a differnt
 * interrupt than INT0, you may have to define some of these.
 */
/* #define USB_INTR_CFG            MCUCR */
/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
/* #define USB_INTR_CFG_CLR        0 */
/* #define USB_INTR_ENABLE         GIMSK */
/* #define USB_INTR_ENABLE_BIT     INT0 */
/* #define USB_INTR_PENDING        GIFR */
/* #define USB_INTR_PENDING_BIT    INTF0 */
/* #define USB_INTR_VECTOR         INT0_vect */

#endif /* __usbconfig_h_included__ */



OSX will trigger usbFunctionSetup(). Linux won't. Windows laughed at the device :lol:

In any case, congratulations for the amazing library that let my iPad receive midi messages from an atmega8 connected to a camera connection kit :D

Post Reply