device descriptor read/64, error -62

General discussions about V-USB, our firmware-only implementation of a low speed USB device on Atmel's AVR microcontrollers
Post Reply
Posts: 1
Joined: Wed Dec 09, 2015 3:59 am

device descriptor read/64, error -62

Post by YuGiOhJCJ » Wed Dec 09, 2015 4:48 am


I would like to build an USB device using V-USB.
This is what I have done:
1) Download the V-USB package

Code: Select all

$ wget -c

2) Modify the source code

Code: Select all

$ diff -r vusb-20121206/usbdrv my-usb-device
Only in my-usb-device:
Only in my-usb-device: main.c
Only in my-usb-device: main.elf
Only in my-usb-device: main.hex
Only in my-usb-device: usbconfig.h
Only in vusb-20121206/usbdrv: usbconfig-prototype.h
Only in my-usb-device: usbdrvasm.o
Only in my-usb-device: usbdrv.o

As you can see, the only differences are that:
- there is a new script for compiling the source code (
- there is a new C file containing the main function (main.c)
- there are some generated files (main.elf, main.hex, usbdrvasm.o and usbdrv.o)
- there is a renamed file (usbconfig-prototype.h -> usbconfig.h)
One interesting thing is the difference between the original usbconfig-prototype.h file and the new usbconfig.h file:

Code: Select all

$ diff vusb-20121206/usbdrv/usbconfig-prototype.h my-usb-device/usbconfig.h 
< #define USB_CFG_DMINUS_BIT      4
> #define USB_CFG_DMINUS_BIT      3

An other interesting thing is to see the new C file containing the main function:

Code: Select all

$ cat my-usb-device/main.c 
#include <util/delay.h> /* for _delay_ms */
#include <avr/interrupt.h> /* for sei */
#include "usbdrv.h" /* for usbMsgLen_t */
/* This function is called when the host sends or receives a control message on endpoint 0 */
usbMsgLen_t usbFunctionSetup(uchar setupData[8])
   usbRequest_t *rq = (void *) setupData;
      case 1:
         /* Turn LED on */
         PORTB |= 1;
      case 2:
         /* Turn LED off */
         PORTB &= ~1;
   return 0;
/* The main function */
void main()
   /* Enforce (re-)enumeration of the device */
   /* Initialize the driver */
   /* Enable interrupts */
   /* Main loop */

3) Compile the source code

Code: Select all

$ avr-gcc -mmcu=atmega8 -Os -DF_CPU=12000000 -c usbdrvasm.S
$ avr-gcc -mmcu=atmega8 -Os -DF_CPU=12000000 -c usbdrv.c
$ avr-gcc -mmcu=atmega8 -Os -DF_CPU=12000000 main.c usbdrv.o usbdrvasm.o -o main.elf
$ avr-objcopy -j .text -j .data -O ihex main.elf main.hex

4) Update the flash of my attiny2313

Code: Select all

$ sudo avrdude -p t2313 -c usbasp -U flash:w:main.hex

5) Update the fuse of my attiny2313

Code: Select all

$ sudo avrdude -p t2313 -c usbasp -U lfuse:w:0xef:m

6) Follow the schematics of the V-USB homepage [1]
7) Connect the device to an USB connector of my PC

Code: Select all

$ sudo dmesg
[59014.200804] usb 5-2: new low-speed USB device number 6 using ohci-pci
[59014.328847] usb 5-2: device descriptor read/64, error -62
[59014.557867] usb 5-2: device descriptor read/64, error -62

As you can see there is something wrong.

Any idea what is wrong?

Thank you.
Best regards.


Post Reply