My version of the AVR-Doper
Posted: Tue Dec 29, 2009 2:21 am
Hello,
i have complete my own version of the AVR Doper.
I have it redesigned with SMDs. And the size is now 71mm x 48mm x 21mm including the case.
If you have a soldering iron with a thin soldering tip you will have no Problems to assemble it.
In place of the three jumpers, I have used a three-pole switch. This switch is operable from outside.
So you don't have to open the case to change something.
The HVSP port is connectet to a 2x4 header. There you can plug in different adaptors for the 8pin or 14 pin controllers.
You can see many pictures and you can download it here: http://www.s-engel.de/index.php?site=15 (only German)
If you want to have a english version of the description, I can try to translate it into english. (With some help for a better understandability)
greetings
- S-Engel
i have complete my own version of the AVR Doper.
I have it redesigned with SMDs. And the size is now 71mm x 48mm x 21mm including the case.
If you have a soldering iron with a thin soldering tip you will have no Problems to assemble it.
In place of the three jumpers, I have used a three-pole switch. This switch is operable from outside.
So you don't have to open the case to change something.
The HVSP port is connectet to a 2x4 header. There you can plug in different adaptors for the 8pin or 14 pin controllers.
You can see many pictures and you can download it here: http://www.s-engel.de/index.php?site=15 (only German)
If you want to have a english version of the description, I can try to translate it into english. (With some help for a better understandability)
greetings
- S-Engel