Hey !!
yesterday i came across AVR Doper circuit diagram. I think its worth a try. So today i bought necessary components(as of - http://www.rototron.info/?Page=USBAVR/USBAVR.ASPX ). but, As i am new to AVR i've some stupid questions.
1)ATMEGA8 - which bits must be cleared ??(i have pony-stk200 so i will be downloading firmware from ponyprog )
2)how can i use it through winavr ?? (i.e. what should i specify in make file ?? or how do i've to modify avrdude config??
Making AVR Doper - Questions
For the fuse bits open Makefile in an editor and have a look at the fuse values described there.
On Windows, you can use AVR-Doper in CDC mode and it behaves as if it were an STK500v2 on a serial port. If you use avrdude, you can also set the jumper for HID mode and tell avrdude to talk to an STK500v2 on port "avrdoper".
On Windows, you can use AVR-Doper in CDC mode and it behaves as if it were an STK500v2 on a serial port. If you use avrdude, you can also set the jumper for HID mode and tell avrdude to talk to an STK500v2 on port "avrdoper".