Code: Select all
9, //bLength (length of interface descriptor 9 bytes)
4, //bDescriptorType (4 is interface)
0, //bInterfaceNumber (This is interface 0)
0, //bAlternateSetting (used to select alternate setting. notused)
2, //bNumEndpoints (this interface has 2 endpoints)
0xFF, //bInterfaceClass (Vendor Defined is 255)
0x5D, //bInterfaceSubClass
0x01, //bInterfaceProtocol
0, //iInterface (Index of string descriptor for describing this notused)
//Some sort of common descriptor? I pulled this from Message Analyzer dumps of an actual controller
17,33,0,1,1,37,129,20,0,0,0,0,19,2,8,0,0,
//Endpoint 1 IN
7, //bLength (length of ep1in in descriptor 7 bytes)
5, //bDescriptorType (5 is endpoint)
0x81, //bEndpointAddress (0x81 is IN1)
0x03, //bmAttributes (0x03 is interrupt no synch, usage type data)
0x20, 0x00, //wMaxPacketSize (0x0020 is 1x32 bytes)
4, //bInterval (polling interval in frames 4 frames)
//Endpoint 2 OUT
7, //bLength (length of ep2out in descriptor 7 bytes)
5, //bDescriptorType (5 is endpoint)
0x02, //bEndpointAddress (0x02 is OUT2)
0x03, //bmAttributes (0x03 is interrupt no synch, usage type data)
0x20, 0x00, //wMaxPacketSize (0x0020 is 1x32 bytes)
8, //bInterval (polling interval in frames 8 frames)
//Interface 1
9, //bLength (length of interface descriptor 9 bytes)
4, //bDescriptorType (4 is interface)
1, //bInterfaceNumber (This is interface 1)
0, //bAlternateSetting (used to select alternate setting. notused)
4, //bNumEndpoints (this interface has 4 endpoints)
0xFF, //bInterfaceClass (Vendor Defined is 255)
0x5D, //bInterfaceSubClass (93)
0x03, //bInterfaceProtocol (3)
0, //iInterface (Index of string descriptor for describing this notused)
//A different common descriptor? I pulled this from Message Analyzer dumps of an actual controller
27,33,0,1,1,1,131,64,1,4,32,22,133,0,0,0,0,0,0,22,5,0,0,0,0,0,0,
//Endpoint 3 IN
7, //bLength (length of ep3in descriptor 7 bytes)
5, //bDescriptorType (5 is endpoint)
0x83, //bEndpointAddress (0x83 is IN3)
0x03, //bmAttributes (0x03 is interrupt no synch, usage type data)
0x20, 0x00, //wMaxPacketSize (0x0020 is 1x32 bytes)
2, //bInterval (polling interval in frames 2 frames)
//Endpoint 4 OUT
7, //bLength (length of ep4out descriptor 7 bytes)
5, //bDescriptorType (5 is endpoint)
0x04, //bEndpointAddress (0x04 is OUT4)
0x03, //bmAttributes (0x03 is interrupt no synch, usage type data)
0x20, 0x00, //wMaxPacketSize (0x0020 is 1x32 bytes)
4, //bInterval (polling interval in frames 4 frames)
//Endpoint 5 IN
7, //bLength (length of ep5in descriptor 7 bytes)
5, //bDescriptorType (5 is endpoint)
0x85, //bEndpointAddress (0x85 is IN5)
0x03, //bmAttributes (0x03 is interrupt no synch, usage type data)
0x20, 0x00, //wMaxPacketSize (0x0020 is 1x32 bytes)
64, //bInterval (polling interval in frames 64 frames)
//Endpoint 5 OUT (shares endpoint number with previous)
7, //bLength (length of ep5out descriptor 7 bytes)
5, //bDescriptorType (5 is endpoint)
0x05, //bEndpointAddress (0x05 is OUT5)
0x03, //bmAttributes (0x03 is interrupt no synch, usage type data)
0x20, 0x00, //wMaxPacketSize (0x0020 is 1x32 bytes)
16, //bInterval (polling interval in frames 16 frames)
//Interface 2
9, //bLength (length of interface descriptor 9 bytes)
4, //bDescriptorType (4 is interface)
2, //bInterfaceNumber (This is interface 2)
0, //bAlternateSetting (used to select alternate setting. notused)
1, //bNumEndpoints (this interface has 4 endpoints)
0xFF, //bInterfaceClass (Vendor Defined is 255)
0x5D, //bInterfaceSubClass (93)
0x02, //bInterfaceProtocol (3)
0, //iInterface (Index of string descriptor for describing this notused)
//Common Descriptor. Seems that these come after every interface description?
9,33,0,1,1,34,134,7,0,
//Endpoint 6 IN
7, //bLength (length of ep6in descriptor 7 bytes)
5, //bDescriptorType (5 is endpoint)
0x86, //bEndpointAddress (0x86 is IN6)
0x03, //bmAttributes (0x03 is interrupt no synch, usage type data)
0x20, 0x00, //wMaxPacketSize (0x0020 is 1x32 bytes)
16, //bInterval (polling interval in frames 64 frames)+
//Interface 3
//This is the interface on which all the security handshaking takes place
//We don't use this but it could be used for man-in-the-middle stuff
9, //bLength (length of interface descriptor 9 bytes)
4, //bDescriptorType (4 is interface)
3, //bInterfaceNumber (This is interface 3)
0, //bAlternateSetting (used to select alternate setting. notused)
0, //bNumEndpoints (this interface has 0 endpoints ???)
0xFF, //bInterfaceClass (Vendor Defined is 255)
0xFD, //bInterfaceSubClass (253)
0x13, //bInterfaceProtocol (19)
4, //iInterface (Computer never asks for this, but an x360 would. so include one day?)
//Another interface another Common Descriptor
6,65,0,1,1,3