Firmware for AVR910

General discussions about V-USB, our firmware-only implementation of a low speed USB device on Atmel's AVR microcontrollers
Post Reply
Chupa

Firmware for AVR910

Post by Chupa » Mon Jan 11, 2010 11:35 pm

Greetings. I know there is a firmware for USB-ASP programmer to make it STK500-compatible.
So I'm interested, is there such a firmware for PROTTOSS AVR910 USB-programmer?
Schematics: http://prottoss.com/projects/AVR910.usb.prog/avr910_usb_programmer.htm
Top
christian
Objective Development
Objective Development
Posts: 1443
Joined: Thu Nov 09, 2006 11:46 am

Re: Firmware for AVR910

Post by christian » Tue Jan 19, 2010 5:59 pm

It should be possible to tune the AVR-Doper firmware for this hardware. Have not looked closely, but it seems to be very similar to USBasp. See the USBasp section in hardware.h.
Top
Post Reply

Return to “V-USB”