Setting up Sonos Beam

General discussions about WebYep
Posts: 1
Joined: Tue Dec 04, 2018 9:34 am

Setting up Sonos Beam

Postby selinamillerus » Tue Dec 04, 2018 9:35 am

1. Download the Sonos controller app on the device you will use for setup.
2. Place the Beam in the desired location and apply power.
3. Connect the supplied HDMI cable to the Beam, and the other end to the HDMI-ARC port on your TV.
4. If your TV does not have an HDMI-ARC port, you can use the supplied optical audio adapter, and then connect to the digital audio out port (optical) on your TV.
5. Open the Sonos app on your device and follow the on-screen instructions.

Sonos Connect Amp | Sonos Amp Connect | Sonos Setup

Return to “WebYep (english)”

Who is online

Users browsing this forum: No registered users and 3 guests