AVRminiProg - Compatible with Atmel's USB Programmers

Registered forum users can contribute their rating for projects based on V-USB in this forum.

Please rate AVRminiProg on a scale from 0 (worst) to 5 (best):

(0)
0
No votes
(1) *
0
No votes
(2) **
0
No votes
(3) ***
0
No votes
(4) ****
1
17%
(5) *****
5
83%
 
Total votes: 6

christian
Objective Development
Objective Development
Posts: 1358
Joined: Thu Nov 09, 2006 11:46 am

AVRminiProg - Compatible with Atmel's USB Programmers

Postby christian » Tue Nov 06, 2007 6:35 pm

Registered forum users can rate AVRminiProg in the poll above.

To comment on the project, reply to this topic.

mostafahk
Posts: 1
Joined: Mon Mar 17, 2008 7:14 pm

Postby mostafahk » Wed May 21, 2008 12:52 pm

thsnks much for this device.

but:
i build it. but jtag dont works.
is this support jtag?

SimonQian
Posts: 19
Joined: Fri Nov 30, 2007 6:42 am

Postby SimonQian » Wed Jul 30, 2008 9:01 pm

mostafahk wrote:thsnks much for this device.

but:
i build it. but jtag dont works.
is this support jtag?


It's OK by my side.
Which pin do you use for JTAG interface?
Can you provide the output from avrdude, so I can check what's wrong.

BTW:
I have made in AVRminiProg support for AVR32 chips.
I don't know if it's meaningful to publish it.

avrlove
Posts: 1
Joined: Sat Sep 22, 2007 7:07 pm
Location: iran
Contact:

Postby avrlove » Fri Aug 08, 2008 2:04 pm

hi. this is a great project but i have a question:
this programmer can emulate avr jtagice mkII . dose this programmer support debugwire?

pireo
Posts: 1
Joined: Thu Jan 08, 2009 2:43 am

Postby pireo » Thu Jan 08, 2009 3:10 am

SimonQian wrote:
mostafahk wrote:thsnks much for this device.

but:
i build it. but jtag dont works.
is this support jtag?


It's OK by my side.
Which pin do you use for JTAG interface?
Can you provide the output from avrdude, so I can check what's wrong.

BTW:
I have made in AVRminiProg support for AVR32 chips.
I don't know if it's meaningful to publish it.


I have built an Avrminiprog. It works well both in Avrminiprog and Usbsap. Thank you very much!

VenomXP

Postby VenomXP » Fri Feb 20, 2009 1:49 pm

Please tell me support he at91sam7s128?

christian
Objective Development
Objective Development
Posts: 1358
Joined: Thu Nov 09, 2006 11:46 am

Re: AVRminiProg - Compatible with Atmel's USB Programmers

Postby christian » Fri Aug 20, 2010 11:17 am

See http://www.recursion.jp/avrcdc/driver.html#windows. I have not tried those drivers, but they are supposed to fix the problem.

lachini
Posts: 3
Joined: Fri Aug 15, 2014 1:54 pm

Re: AVRminiProg - Compatible with Atmel's USB Programmers

Postby lachini » Sun Sep 06, 2015 5:30 am

I make it, and work good in Linux (SLAX), but in Win7 32-bit don't work; Please see test result in below. I think my driver not good for avrispmkii mode.

Driver used by me : LibUSB-Win32 Devices
Test result in Win7 32-bit by AVRDUDE ver 5.5 :
==================[Win7 32-bit by AVRDUDE ver 5.5]==================
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

E:\>avrdude -c avrispmkii -P usb -p t2313 -v

avrdude: Version 5.5, compiled on Dec 19 2007 at 21:17:54
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

System wide configuration file is "E:\avrdude.conf"

Using Port : usb
Using Programmer : avrispmkii
avrdude: usbdev_open(): Found AVRISP mkII, serno: 00A20000011E0
avrdude: usbdev_open(): error setting configuration 1: libusb0-dll:err [set_configuration] could not set config 1: win error: The parameter is incorrect.

avrdude: usbdev_open(): did not find any USB device "usb"
==================[Win7 32-bit by AVRDUDE ver 5.5]==================

Test result in Win7 32-bit by AVRDUDE ver 6.1 :
==================[Win7 32-bit by AVRDUDE ver 6.1]==================
C:\>avrdude -c avrispmkii -p t2313 -v

avrdude: Version 6.1-svn-20131205, compiled on Dec 5 2013 at 17:34:22
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch

System wide configuration file is "C:\WinAVR-20100110\bin\avrdude.conf"


Using Port : usb
Using Programmer : avrispmkii
avrdude: usbdev_open(): Found AVRISP mkII, serno: 00A20000011E0
avrdude: usbdev_open(): error setting configuration 1: usb_set_configuration: could not set config 1: win error: The parameter is incorrect.

avrdude: usbdev_open(): did not find any USB device "usb"
==================[Win7 32-bit by AVRDUDE ver 6.1]==================


Test result in Linux 32-bit by AVRDUDE ver 5.5 :
==================[Linux 32-bit by AVRDUDE ver 5.5]==================
root@slax:~# avrdude -c avrispmkii -P usb -p t2313 -v

avrdude: Version 5.5, compiled on Jan 14 2009 at 06:21:50
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/root/.avrduderc"
User configuration file does not exist or is not a regular file, skipping

Using Port : usb
Using Programmer : avrispmkii
avrdude: usbdev_open(): Found AVRISP mkII, serno: 00A20000011E0
AVR Part : ATtiny2313
Chip Erase delay : 9000 us
PAGEL : PD4
BS2 : PD6
RESET disposition : possible i/o
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :

Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 6 4 0 no 128 4 0 4000 4500 0xff 0xff
flash 65 6 32 0 yes 2048 32 64 4500 4500 0xff 0xff
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
calibration 0 0 0 0 no 2 0 0 0 0 0x00 0x00

Programmer Type : STK500V2
Description : Atmel AVR ISP mkII
Programmer Model: AVRISP mkII
Hardware Version: 17
Firmware Version: 17.17
Vtarget : 3.9 V
SCK period : 0.12 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1e910a
avrdude: safemode: lfuse reads as A2
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as FF

avrdude: safemode: lfuse reads as A2
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as FF
avrdude: safemode: Fuses OK

avrdude done. Thank you.
==================[Linux 32-bit by AVRDUDE ver 5.5]==================


Return to “V-USB Project Ratings”

Who is online

Users browsing this forum: No registered users and 1 guest