Objective Development Forums

Change to the value you suggested(except R2,R3), but PS2 controller still not working(tested 3 of ps2 controllers) PSX controller normal directional and button working but not the analog stick,L3 and R3. Any idea what is wrong? is it the hardware or the software? Anyone successfully built this with ...

Tried both original file and file from this site,psx ok(but analog stick not working)
and ps2 totally not responding...
Will try the mod u post later...

Thanks

Thanks you both of you, it works! ^^ All 3 avr back to normal, but for the ps2 controller part still not working. When I plugged the ps2 con in all the axis will all move to 255, when I touched DAT pin the axis will jumped... Here is my schematic is the value i use correct? Schematic Thanks!

Thanks alot and the prompt reply!

I really appreciate for all ur help with a newbie like me!
Will try again soon after my bath ^^.

Thanks!

That means R2 will be 4k7ohm if i use 100pF?

Sorry but i'm the worker+user(strictly follow the schematic),when it comes to calculation,maths @@

Thanks again!

Thanks for the circuit, but i can't find 1nF from my spare.

What i have only 100pF, 10nF,100nF,1uF,15pF,33pF.
Will have to go search in my office.

Thanks again for the help!

Can you show me the circuit of 555 to the pin 9 of atmega8?
I have 555 timer at hand.

Pls help me, thanks alot!

Hi christian, Thanks for the info. I didn't disable RSTDISBL and SPIEN as it was non check-able. I only checked WDTON,EESAVE,BOOTSZ1,BOOTSZ0,BOOTRST,BODLEVEL, SUT1,SUT0,CKSEL3,CKSEL2,CKSEL1,CKSEL0 and once programmed the atmega8 stop to repond to the ponyprog. I use SI Prog API serial to program the...

Thanks Sergey! Just order another few atmega8, but have to wait till next week. Guess I have to learn to ask clearly before I do things blindly. By the way, can 3 of my wrongly configured fuses atmega8 be saved? "If you have programmed fuses on the contrary it is necessary to use parallel progr...

Thanks for the answer. Just an update, after i post the 2nd post i manage to get the ps1 controller to work(except analog stick and R3,L3 button not working) using BOOTSZ1,BOOTSZ0,SUT0 ticked(i'm using ponyprog2000)but not PS2. After I saw ur post i ticked all fuses except BODEN and CKOPT. Means WDT...

I still can't get it to work...
Already blow 1 atmega8 due to wrong setting of fuse...
Anyone know how can i contact the author or those who have successfully build a working one?

Tried PSX and PS2 controller but not working.
Thanks

Hi I just built the usbjoy for ps2 controller. I program atmega8 using the main_psx.hex. All went well but when plug it into usb "unknown usb device" and the LED keep blinking. The config and security bits i left it default which is "SPIEN 1, BOOTSZ1 1, BOOTSZ0 1, SUT0 1, CKSEL3 1, CK...