Objective Development Forums

glad to help.

IIRC the electrical specs for the I/O pins are different between the 8 and 88. If you use Z-diodes on D+/D-, they HAVE to be 3V6/<= 500mW. If I take one of my atmega projects and put 1 watt's on there, it will not enumerate. However on the atmega8 it works just fine. The atmega 8 projects should run...

Yup, done many projects with 168's The biggest mistake is using the whole watt diodes.. You need to use the 1/2 watt with 168's

well usb-v and arduino are not the same animal. you can look at this to see how to use usb-v with arduino viewtopic.php?f=8&t=3599 and look here for a data store option, http://www.pjrc.com/teensy/rawhid.html

I see you are using linux.

0h , oops I didnt see that.. I dont have the linux libs, but if you need the source let me know, I can zip it up.

LOL, I have no friggen clue man.. It took me all day to find it. I zipped up the libs and includes for xp, hope this helps

http://spawnlinux.dyndns.org/DoCz/down_s/temp/

That pissed me off too, I had to give in , I could not make it with out the ddk installed. Once installed compiles just fine

I put up a lil test-prog without the whole PS2 mouse and keyboard stuff but it won't work either.

Wait are you saying you cant even get examples to work? If so scratch the entire xbox thing for now, and start from the examples. Get a normal HID joystick app working then try to complicate

Do your self to favors. 1) get xbcdhttp://www.redcl0ud.com/xbcd.html 2) get USBlyzer. Once the xbcd is installed it will show up as a xbox when you connect a real xbox or this avr. Tell me what you learn. I will look over your code later, when I have time.

Wow, I have also put this aside for a bit.. I know you need the DescrDevice I posted. as for a report I used this. //XBOX // standard descriptor types #define CONFIGURATION 2 #define INTERFACE 4 #define ENDPOINT 5 uchar XBOXDescriptorConfiguration[] = { 0x09, //size of this desc in bytes CONFIGURATI...

I believe the limitation is to the port. and from what I remember its 256 per port.

Cant say for sure on that funky-nes.. but the diods will make for troubles.. On that note.. Do your self a favor.. Scratch Ralf's code, if you have not already, to reset the device. Un solder his bridge from pd0 to pd1, and control the pull up with usv-v.. Ralf's did not have the latest when he desi...

Well if you have 1w's in there that is a problem period. As far as the blinks go, it look good? Your fuse are correct.. Here is my blink code but I dont see why yours wont work. I use the ground for the light not +5.. #define LED_OFF() do { PORTD |= 0x20; } while(0) #define LED_ON() do { PORTD &...

I ported his code over to an 168 same as your chip for the most part, but not the P... That may be the issue.. I had some struggles but was able to make it work. Make sure you do not use 1 watt diods .. They will not work, use 1/2. This goes for all 88/168 chips. Well, I used the latest source files...

Hey I use the boatloader with my 168. And I have also seen these errors. I can not offer you an answer for what they mean but I can tell you what I saw cause and fixed them. I get those errors when my usbconfig does not match the latest .0 files ( some inconsistency ). The fix for me was to either g...