Objective Development Forums 2015-06-04T04:31:11+02:00 https://forums.obdev.at/app.php/feed/topic/9856 2015-06-04T04:31:11+02:00 2015-06-04T04:31:11+02:00 https://forums.obdev.at/viewtopic.php?t=9856&p=29803#p29803 <![CDATA[Re: Atmega16 5v self powered schematics]]>
If your processor is to be powered at 5 volts, you will need to reduce/limit the usb D+ and D- signals to 3.x volts which is usually done by inserting two 3.6volt zeners across those lines (with suitable resistors).

Does that answer your question?

Cheers,

Ross

Statistics: Posted by Ross_ValuSoft — Thu Jun 04, 2015 4:31 am

]]> 2015-06-02T11:05:41+02:00 2015-06-02T11:05:41+02:00 https://forums.obdev.at/viewtopic.php?t=9856&p=29789#p29789 <![CDATA[Atmega16 5v self powered schematics]]> https://github.com/obdev/v-usb/blob/master/circuits/with-vreg.sch
I want to modify this circuit so that my MCU is powered by 5v regulator in my development board and usb signals are send in 3.3v logic level can this be done or not
I am using 117a-33ge voltage regulator

Statistics: Posted by neo — Tue Jun 02, 2015 11:05 am

]]>