Objective Development Forums

Avr Doper with Vista

2008-08-25T12:45:39+02:00

You may upload projects to http://avrusb.wikidot.com/ in the "projects" section. You must register with wikidot.com and become a member of the site in order to create pages.

Then please drop us a note so that we can link it.

Statistics: Posted by christian — Mon Aug 25, 2008 12:45 pm

i got problem in HID mode not CDC

2008-08-24T18:47:19+02:00

hi there
I'v tried the CDC mode in many pc's and it worked 100% on xp and Vista
but the problem is in HID mode,on my old pc (amd sempron64 with k8t mb and VIA chipset)
it worked 100% on both modes without any problems , but on my new pc (amd athlon64x2 with k9n4 mb and nvidia chipset),it didn't work perfectly on HID modes (when i try to read or do something in avrdude it get freeze for 2 or 3 seconed then responed but sometimes it doesn't response at all , but in CDC mode it's working 100% in avr studio (but the same problem as HID mode in avrdude)
so in my opinion the CDC this time is realiable than HID mode.
anyway i would like to tell u that I'v finished the AVRmini Doper programmer , so may i upload it and share it on this site?

Statistics: Posted by megaboy — Sun Aug 24, 2008 6:47 pm

Avr Doper with Vista

2008-08-18T19:57:30+02:00

Yes, Osamu has done a great job with that. But even with Windows XP or 2000, there are some hosts where the driver does not work. We don't (yet) know why.

Statistics: Posted by christian — Mon Aug 18, 2008 7:57 pm

it's ready for vista now

2008-08-17T20:53:18+02:00

hi guys ,the cdc driver for window Vista is ready now , osamu tamura san had fix the problem with the low bulk transfer. go to his home page and u will find the driver

Statistics: Posted by megaboy — Sun Aug 17, 2008 8:53 pm

Avr Doper with Vista

2007-10-07T21:26:35+02:00

CDC mode does not work reliably on all operating system / hardware combinations. Osamu Tamura maintains a list of compatible and incompatible systems in his AVR-CDC project.

Statistics: Posted by christian — Sun Oct 07, 2007 9:26 pm

Avr Doper with Vista

2007-10-05T22:23:33+02:00

Hi Folks,

I have build the AVR-Doper and it's working very well on my XP machine, but on my Vista laptop the driver won't install.
It's saying something like

the system can not find the file specified

I tried various suggestions done in this post; http://forums.obdev.at/viewtopic.php?t=406
The only thing that helps a little bit is what Toshas suggested

"just change "usbser.sys" -> "brusbser.sys"

If i change this in the Avrdoper.inf file, the driver installs and in Vista there is an extra comport(Com6).
But when i start then Avr studio it won't find the AVR-Doper.
I need the Doper in CDC mode because i'm using Bascom-avr and Bascom don't support HID mode.

Somebody a idea to get it working?

Thanks,
Evert
www.evertdekker.com

Statistics: Posted by Guest — Fri Oct 05, 2007 10:23 pm