Objective Development Forums

Re: ATMEGA32A and VUSB

2011-06-06T03:51:17+02:00

I have successfully V-USB to MEGA32A on, and successfully tested a number of V-USB Project

But I do not know how to upload files

Statistics: Posted by waiman — Mon Jun 06, 2011 3:51 am

Re: ATMEGA32A and VUSB

2011-05-23T13:35:39+02:00

I don't have the schematic at hand. But I only used a few components:
100nF to stabelize VCC
2.2k Ohm pull up from VCC to D-
470 Ohm from D- to INT1
470 Ohm from D+ to INT0
20Mhz XTal with 2x 20pF to ground

Statistics: Posted by Daid — Mon May 23, 2011 1:35 pm

Re: ATMEGA32A and VUSB

2011-05-19T09:54:42+02:00

Thanks for your response, great to hear it works. Can you point me to the hardware circuit you used please.

Statistics: Posted by Guest — Thu May 19, 2011 9:54 am

Re: ATMEGA32A and VUSB

2011-05-16T18:13:29+02:00

I used the ATMega32A just fine for V-USB (with 5V hardware, no zeners). Just make sure you use the right crystal, and set the fuses right (some "A" parts have different fuse settings then the not "A" variants)

Statistics: Posted by Daid — Mon May 16, 2011 6:13 pm

ATMEGA32A and VUSB

2011-05-16T17:22:29+02:00

I am having trouble with VUSB and an ATMEGA32A which is supposedly a drop in replacement for the ATMEGA32. I suspect it is the hardware interface. Has anyone used VUSB successfully with the ATMEGA32, if so what was the hardware interface circuit?

Statistics: Posted by Guest — Mon May 16, 2011 5:22 pm