HVSP mode: only ~4.8 V

2008-01-13T19:17:05+02:00

This is an NPN transistor. The voltage at the base should never exceed ~ 0.7 V. If you measure 4.5 to 5 V, the transistor is not connected correctly or it's broken.

Statistics: Posted by christian — Sun Jan 13, 2008 7:17 pm

HVSP mode: only ~4.8 V

2008-01-12T13:42:00+02:00

Hi,

at the cathode of the diode I only get ~4.8V. After the resistor from the AVR-pin and before the Base of Transistor the Voltage differs only from 4.5 to 5 V. So that the transistor is not switching. What's my fault?

Thanks

Statistics: Posted by Guest — Sat Jan 12, 2008 1:42 pm

Objective Development Forums

HVSP mode: only ~4.8 V

HVSP mode: only ~4.8 V